** CW thread motor - please note because the prop screws down on these you do need both CW & CCW thread motors, both are listed seperately on our site **
** Also check out the ergonomic prop nuts available seperate, no more tools needed **
Introducing the latest addition to the Armattan Oomph line of motors.
The construction of these motors was carefully selected with smoothness in mind. A lot of motors offer insane performance these days, but that usually comes with multiple drawbacks. High amp draw is the first concern. Noise and vibrations making tuning a more tedious task is another concern. And of course, if you have noise on your build, or if it is not well tuned, it affects HD footage greatly.
In other words, really high output motors are not suited for freestyle flying. They are better for racing. Flights are too short and the footage is only "OK."
-Low amp draw. Check!
-Low noise. Check!
-Low vibration. Check!
Results: Easy to tune, smooth as butter, and crisp HD footage. No less.
Stator Diameter: 22mm
Stator Height: 6mm
KV (rpm/Volt): 2300
Weight: Around 29 grams with trimmed wires
Recommended Props: 5 or 6 inch
LiPo Compatibility: 3-4S
Prop Mount Height: 5mm
Prop Mount Diameter: 5mm
Interior Threading: CW or CCW
Magnets: N54H arc magnets
Stator Laminations: Laminated for smoothness
Winding: Single Wire
Bearing: Genuine NMB