PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter

EMAX Skyline32+ With OSD Flight Controller (Acro)

Skyline 32 Flight Controller + on board OSD to simplify your FPV build. No need for unreliable external OSD modules anymore. With a simple flick of a switch, the OSD can easily and quickly be turned ON or OFF. The OSD is integrated into the Flight Controller so setting up is simple.
Availability: Out of stock
£21.76
£14.40

Overview:

Skyline 32 Flight Controller + on board OSD to simplify your FPV build. No need for unreliable external OSD modules anymore. With a simple flick of a switch, the OSD can easily and quickly be turned ON or OFF. The OSD is integrated into the Flight Controller so setting up is simple.

Connect an fpv camera and Video Tx directly to the Skyline 32 + OSD board. With MW_OSD pre installed on the Skyline32+OSD, the pilot can change PID on the spot through OSD without having to connect to a computer. Simply use the transmitter’s stick commands and follow the OSD menu. Supports PPM signal via Channel 1 in RC_IN port (UART2), and supports SBUS signal via Channel 4 in RC_IN port (UART2).

This is the acro version WITHOUT barometer & magnetometer.

Features:

- Run Cleanflight, Betaflight, or Baseflight
- Wire-to-Board micro connectors.
- Built-in gyro/accelerometer (Advanced Version also includes barometer and magnetometer)
- Blackbox ready with 2MB of storable data.
- Thin and ultra compact for clean/tight builds.
- Uses top quality electronic components and high precision SMT.
- 32-bit ARM micro processor running at 3.3v / 72MHz.
- Fly in Manual Mode, Angle Mode, Horizon Mode, Head-Holding Mode, Head-free Mode, and Altitude-Hold Mode (Altitude-Hold - Mode is available in Advanced version).
- Supports Quad-,Tri-,Hex, Octo-, various multirotors.
- Flexible RC Input: PPM, Non-Inverted SBUS, PWM.
- Flash to latest firmware through the Micro-USB (**NOTE: Please be sure to leave OSD switch OFF when using Micro-USB).
- GPS Hold / Return-To-Home Feature supported (GPS module needed).

 

Specifications:

- Dimension: 35mm x 35 mm x 5 mm (30.5mm Mounting)
- Weight: 4.8g (W/O wires)

Included:

1x SKYLINE32 +OSD (Advanced)
2x RC breakout cable
1x vBat cable
1x buzzer cable
2x UART cables
4x Nylon Standoffs and nuts
1x Header Pin Assortment (Straight and 90 Degree)