Little Bee 20A Pro Mini ESC with BLHeli, OneShot125 and Damped Light (2-4S)
The newly upgraded Little Bee 20A Pro features a faster processor F396MCU for smoother operation and improved compatibility with high KV motors.
Availability: Out of stock
The newly upgraded Little Bee 20A Pro features a faster processor (F396MCU) for smoother operation and improved compatibility with high KV motors.
These tiny ESCs have all the performance you would hope for and the same tiny size as the DYS BL20A. You'll struggle to find a frame small enough to fit these ESCs and they'll still give you plenty of headroom on a standard 250 size quad!
Don't forget - these ESCs have to BEC so you will still need a 5V power source for your flight controller, receiver, etc. Have a look at the related items below for suitable a suitable PDB and BEC. You may also need bullet connectors unless you intend to solder your motors direct to the ESCs.
** We also stock the new Little Bee 4 in 1 board for tidier builds - http://www.hobbyrc.co.uk/little-bee-20a-pro-4-in-1-mini-esc-with-blheli-oneshot125-and-damped-light-2-4s **
- Input: 2-4s Lipo
- Version: Pro Version with F396MCU
- Constant: 20 Amps
- Burst: 30 Amps
- Weight: 4g bare board
- Dimensions: 23x12.5x3mm
- Motor wire: 70mm
- Signal wire: 120mm
- PCB - 4 Layer Blind Pole PCB - 3oz Pour
- Mosfet: N-Channel
- BEC: None "Opto"