PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter

Matek 5 in 1 LED & Power Hub V3 Advanced PDB

PDBs are becoming smarter and smarter - the Matek 5 in 1 LED & Power Hub V3 PDB is no exception. Featuring both 5V 3A and 12V 500mA BECs, a 5V LED controller, lost model finder and low voltage alarm - the new V3 PDB is now comprised of 2oz copper for even greater current carrying capability.
Availability: In stock
£6.00

Overview:

PDBs are becoming smarter and smarter - the Matek 5 in 1 LED & Power Hub V3 PDB is no exception. Featuring both 5V 3A and 12V 500mA BECs, a 5V LED controller, lost model finder and low voltage alarm - the new V3 PDB is now comprised of 2oz copper for even greater current carrying capability.

When running a 4-6S LiPo, the BEC can output 12V to power cameras and video transmitters. The built in 5V LED light controller can be toggled through three flashing modes (constant, slow or fast flash).

The buzzer on board can be triggered via a switch on your transmitter to act as a lost model finder in the event of an unexpected landing and can also act as a low voltage alarm to alert you that it's time to change batteries - the LEDs will also flash to remind you.

 

Features:

- Input: 3-6S (9-26V DC)
- 1 Battery input & 4 ESC outputs
- 4 pairs 5V LED light outputs
- Regulated 5V & 12V outputs
- LED power indicators (5V & 12V outputs)
- Low voltage alarm setting indicators
- Dimensions: 46x36x6mm
- Weight: 9g
- Mounting holes: 30.5mm square spacing (Naze32, CC3D, etc.)

 

Specifications:

PDB:-
- 2oz copper
- 4 layer PCB
- 20A continuous current per ESC
- 25A burst current per ESC

5V BEC:-
- Designed for RX, FC, OSD & Servos
- DC/DC synchronous buck regulator
- Voltage: 5V +/- 0.1VDC
- 3A continuous current
- Short circuit protection (10 seconds/minute)

12V BEC:
- Linear regulator - very low noise
- Designed for cameras and VTX
- Voltage: 12.0 +/- 1.3VDC (4-6S operation)
- Continuous current: 500mA @16V IN / 250mA @24V IN

LED Light Controller / Lost Model Finder:
Assign AUX channel to three pos. switch:
- Middle position: OFF (1400-1600)
- High position: LED ON or flash (1700-2000)
- Low position: Beep & LED flash (1000-1300)

Low Voltage Alarm:
- Low voltage selector (3.4V, 3.5V or 3.6V)

 

Included:

- 5 in 1 v3 PDB
- Nylon mounting fixtures
- 100mm servo cable
- Manual

Customers who bought this item also bought

HobbyRC Rubberised Battery Strap 250x20mm

The HobbyRC battery strap is just the right length for most mini quad batteries while the rubberised reverse grips your battery and helps to stop it sliding back and forth in flight.
£0.48

Emax RS2205 2300KV "Red Bottom" RaceSpec Motor

Introducing the Emax Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances.
£14.64

HobbyRC Race Spec 1400mAh 4S 45-90C LiPo Battery

Manufactured alongside Gens Ace / Tattu batteries in the world renowned Grepow factory, these high discharge LiPos have had no expense spared in the production process.
£15.60