PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter

Matek F405-AIO F4 Betaflight OSD Flight Controller

This is an All-in-one (AIO) F4 FC by Matek, combing a flight controller and PDB together, built-in BetaFlight OSD, Dual BEC 5V/2A & 9V/2A, SD card slot for Blackbox and current sensor.
Availability: Out of stock
£31.90

Overview:

This is an All-in-one (AIO) F4 FC by Matek, combing a flight controller and PDB together, built-in BetaFlight OSD, Dual BEC 5V/2A & 9V/2A, SD card slot for Blackbox and current sensor.

Features:

- MCU: 168MHz STM32F405
- IMU: 32K ICM20602 accelerometer/gyro (SPI)
- Max. 32K Gyro update & 16K PID Loop
- OSD: BetaFlight OSD w/ AT7456E chip
- Blackbox: MicroSD card slot (SD/SDHC)
- VCP, UART1, UART2, UART3, UART4, UART5
- Built in inverter for SBUS input (UART2-RX)
- PPM/UART Shared: UART2-RX
- SoftSerial on S5 & S6 optional
- Smartaudio & Tramp VTX protocol supported
- Spektrum BIND_PIN: RX4
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: Yes
 

PDB Specifications:

- Input: 9~27V (3~6S LiPo) w/TVS protection
- PDB: 4x30A (Max.4x50A), 6 layers*2oz copper PCB
- Dual BEC: 5V 2A & 9V 2A
- LDO 3.3V: Max.300mA for Spektrum RX
- Current Sensor 200A (Scale 165)
- Battery Voltage Sensor: 1:10 (Scale 110)
- 2x LEDs for FC STATUS (Blue, Red)
- 6x PWM / DShot outputs without conflict
- 5x UARTs
- 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
- 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
- 1x pair I2C1 pads (for INAV firmware only)
- 1x Side-press button for BOOT(DFU) mode
- 36x51mm PCB with 30.5mm mounting holes & XT60 socket
- 12g

 

Included:

- 1x Rubycon ZLH 35V/470uF (Low ESR)
- 4x M3 Anti-vibration Standoffs
- FR4 PCB Plate 36*36*1mm