PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter
New Products

Matek Systems

View as
Sort by
Display per page

2pcs Matek 5V LED Circle for Motor Mounts (Blue)

Designed to sit between your motor screws and frame plate, these circular LED boards are perfect for 18XX or 22XX motors. There's no neater way to integrate LED orientation indicators into your build!
£3.60

2pcs Matek 5V LED Circle for Motor Mounts (Green)

Designed to sit between your motor screws and frame plate, these circular LED boards are perfect for 18XX or 22XX motors. There's no neater way to integrate LED orientation indicators into your build!
£3.60

2pcs Matek 5V LED Circle for Motor Mounts (Red)

Designed to sit between your motor screws and frame plate, these circular LED boards are perfect for 18XX or 22XX motors. There's no neater way to integrate LED orientation indicators into your build!
£3.60

2pcs Matek 5V LED Circle for Motor Mounts (White)

Designed to sit between your motor screws and frame plate, these circular LED boards are perfect for 18XX or 22XX motors. There's no neater way to integrate LED orientation indicators into your build!
£3.60

Matek 3S RGB LED Circle

Circular RGB LED with selectable colours.
£3.60

Matek 4S RGB LED Circle

Circular RGB LED with selectable colours.
£3.60

Matek 5 in 1 LED & Power Hub V3 Advanced PDB

PDBs are becoming smarter and smarter - the Matek 5 in 1 LED & Power Hub V3 PDB is no exception. Featuring both 5V 3A and 12V 500mA BECs, a 5V LED controller, lost model finder and low voltage alarm - the new V3 PDB is now comprised of 2oz copper for even greater current carrying capability.
£6.00

Matek HUBOSD eco H-Type PDB

The HUBOSD eco H-Type with STOSD8 140A Current Sensor and Dual BEC from Matek Systems.
£12.28

Matek HUBOSD eco X-Type PDB

The HUBOSD eco X-Type with STOSD8 140A Current Sensor and Dual BEC from Matek Systems.
£12.28

Matek Linear Regulator 4S LiPo to 12V 300mA

Generally the input voltage of FPV cameras is 7~13V - with a 4S LiPo input, the Matek linear regulator can convert 14~17V to 12V, and power camera and/or 12V 1W LEDs without ripples or noise.
£3.00

Matek Micro BEC 5V/12V Adjustable

This is a high efficiency rectified step-down switch mode converter. It offers a very compact solution to achieve 1.5A continuous output current over a wide input supply range.
£3.00

Matek Mini Power Hub V3 PDB (5V & 12V BEC)

The Matek Mini Power Hub V3 PDB offers regulated 5V and 12V BEC outputs and a camera/VTX hub with voltage selectors all in a familiar 36mm square form factor - ideal for stacking below your flight controller (Naze32, CC3D, etc.).
£4.44

Matek WS2812B LED Bar

Make your own little LED strip arrangement with this stick of WS2812B LEDs. Matek crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together!
£3.00

Matek WS2812B LED Bar with 5V Buzzer

Killing two birds with one stone, the Matek LED Bar with 5V Buzzer is designed for use with Naze32, CC3D, Skyline and SP F3 flight controllers running Cleanflight firmware.
£3.00

Matek WS2812B RGB LED Bar with MCU

The Matek WS2812B RGB LED Bar with MCU comes as a single stick with 8 individually addressable RGB LEDs & STM MCU assembled. It provides dual control modes, and is ideal for illuminating your mini-quad.
£4.20

Matek XT60 PDB (5V & 12V BEC)

The Matek XT60 PDB offers regulated 5V and 12V BEC outputs in a familiar 36mm square form factor - ideal for stacking below your flight controller (Naze32, CC3D, etc.).
£4.44