PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter

Micro MinimOSD for Naze32 with MultiWii OSD & KV Team Mod

The Micro MinimOSD is the next evolution of the minimosd with all the features of the very popuar KV Team modded OSD but in a tiny 15x15MM size!
Availability: Out of stock
£9.60

Overview:

The MinimOSD was engineered to bring users a very powerfull OSD. With all the features of the very popuar minimosd KV Team modded OSD but in a tiny 15x15MM size.

Apart from the size, the only differenece is that it does NOT have the DC/DC converter - this means less heat when powered off a flight controller. The micro MinimOSD is the same as the older MinimOSD hardware but has been modified to take advantage of custom firmware options. You can flash firmware that is MAVLink compatible for ArduCopter, or MultiWii Serial compatible for MultiWii and Baseflight/Cleanflight control boards. You can connect two batteries up to 4S so you can see the main flight battery voltage.  The second port will allow a separate FPV battery voltage on the display as well. There is also a pin for analog or digital PWM RSSI and a connection where you can attach a current sensor.

Features:

- All the same features as the original, around 1/3 of the size.
- NO DC/DC converter. Power board via 5V DC.
- FTDI cable compatible pinout
- Two LED indicators
- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- 15x15MM size!
- Modifications for direct connection of two batteries (up to 4S)
- Pad for an Analog or Digital PWM RSSI signal
- Pad for the connection of a Current Sensor
- ATmega328P with Arduino bootloader

 

PLEASE NOTE: We cannot accept any returns after the board has been soldered/modified. Please test the board (via FTDI) BEFORE soldering the header pins on.

Customers who bought this item also bought

HobbyRC Rubberised Battery Strap 250x20mm

The HobbyRC battery strap is just the right length for most mini quad batteries while the rubberised reverse grips your battery and helps to stop it sliding back and forth in flight.
£0.39

4pcs 200mm DuPont Single Pin to Pin (1P) Connector Wire

A handy connector for use in many applications when wiring multirotors including GPS modules, OSDs, flight controllers and more.
£1.06

4pcs 110mm DuPont Single Pin to Pin (1P) Connector Wire

A handy connector for use in many applications when wiring multirotors including GPS modules, OSDs, flight controllers and more.
£0.90