PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter

Pololu 12V 600mA Step Down Voltage Regulator (D24V6F12)

The compact (0.4″ × 0.5″) D24V6F12 switching step-down (or buck) voltage regulator takes an input voltage between 15 V and 42 V and efficiently reduces it to 12 V while allowing for a maximum output current of 600 mA.
Availability: In stock
£5.92

Overview:

The compact (0.4″ × 0.5″) D24V6F12 switching step-down (or buck) voltage regulator takes an input voltage between 15 V and 42 V and efficiently reduces it to 12 V while allowing for a maximum output current of 600 mA. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

This is a switching regulator (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%, which is much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large. This regulator has a fixed 12V output, and a 600 mA maximum output current.

NOTE: This is a step-down (or buck) voltage regulator - a 3S battery whose voltage has dropped below 12V will not allow this regulator to output 12V. This is recommended for those using 4S batteries or above.

 

Features:

- Input voltage: [output voltage + dropout voltage] 15 to 42 V
- Fixed 12 V output (depending on regulator version) with 4% accuracy
- Maximum output current: 600 mA 
- 1.25 MHz switching frequency
- 2 mA typical no-load quiescent current (20 μA typical quiescent current with SHDN = LOW)
- Integrated over-temperature and over-current shutoff
- Small size: 0.5″ × 0.4″ × 0.1″ (13 mm × 10 mm × 3 mm)

Customers who bought this item also bought

Pololu 5V 600mA Step Down Voltage Regulator (D24V6F5)

The compact (0.4″ × 0.5″) D24V6F5 switching step-down (or buck) voltage regulator takes an input voltage between 7 V and 42 V and efficiently reduces it to 5 V while allowing for a maximum output current of 600 mA.
£5.47

HobbyRC Rubberised Battery Strap 250x20mm

The HobbyRC battery strap is just the right length for most mini quad batteries while the rubberised reverse grips your battery and helps to stop it sliding back and forth in flight.
£0.48

Lumenier 4Power Mini PDB

The Lumenier 4Power Mini PDB. A 36mm simple power distribution board for small quadcopters with the option to add a Pololu module for additional outputs.
£5.04