The Airbot Asgard V2 is an all in one (AIO) Flight Controller and four BLHELI_S ESCs on one PCB. The Asgard also includes an OSD, SD Card, Current sensor & BEC.
The Airbot Asgard32 is an all in one (AIO) Flight Controller and four 35A BLHELI_32 ESCs on one PCB.
Airbot is back at it with the NOX all in one flight controller and 4in1 35A esc.
28x32mm Flight controller with 20x20 mm mounting holes.
Upgraded version of OMNIBUS F4, the OMNIBUS F4 Pro (Some shops call it as OMNIBUS F4 PRO V2) with SD card support, has a 5v3A BEC, LC filter for Camera and VTX and a built in Current sensor.
The Airbot Omnibus F4 V6 is a new generation AIO Flight control for FPV, based on F405 MCU, using F405 MCU controls OSD over SPI bus in DMA mode,
The omnibus F7 V2.2 Flight Controller is an innovative product that includes two gyros (user selectable).
The OmniNXT F7 is Airbot’s top of the range flight controller based on the Omnibus F7 v2. It uses the trusty MPU6000 Gyro with an additional ICM20608 on top.
The Airbot Ori32 is a 4in1 25A ESC with 20x20 mm Mounting holes running BLHELI32 firmware and supporting ESC telemetry.
4in1 35A ESC with 30.5x30.5 mm Mounting holes, supports DSHOT 1200, BLHELI32 firmware.
The Airbot Wraith32 V2 Metal ESCs feature a massive 60A burst rating and all the features you'd expect from a Blheli_32 enabled esc.
Version 2 of the popular Airbot Wraith32 V2 35A ESCs has a 32bit MCU running BLHeli_32 firmware.
JST 8 pin 30mm Cable for 4in1 ESCS (Like Airbot Typhoon etc)
JST 8 pin 70mm Cable for 4in1 ESCS (Like Airbot Typhoon etc)
The Omnibus F4 Fireworks V2 flight controller uses the ICM20608 over SPI for the best possible flight performance.