CL Racing F4 Mini Flight Controller
The CL Racing Mini Flight Controller now available in 20x20mm format for 2/3/4" racers.
Availability: In stock
The CL Racing Mini Flight Controller now available in 20x20mm mini format for 2/3/4" racers.
** IMPORTANT: These boards have specific warranty conditions set by the manufacturer (not us), please see the bottom of the page **
- Built in Betaflight OSD
- STM32F405 @168mhz
- Direct 2-6S input
- MPU6000 gyro
- Filtered 5V and 9V BEC's
- Direct stack on Frsky xm+ rx
- 4 in 1 ESC socket and direct solder on 4 in 1 ESC pads.
- Build in Camera control resistor and capacitor
- Current sensor input solder pad
- Inverter for Sbus (on UART1),
- TX4(uart4) near VTX pads for easy smart audio or tramp wiring
- 4 UARTS ---- TX6(uart6) SAT(uart6 RX ), RX4 ( uart4 ), RX3 TX3( UART3 )
- Direct solder 4 in 1 esc cable easy to adapt to all ESC
- CL Racing F4 Mini Flight Controller
- 4x Rubber Vibration Isolation Grommets
Armattans Warranty Wording:-
We do not accept or consider claims after 7 days from after the customer receives the product. Customers are expected to test to make sure their electronics are in good working order within this 7 days and does not extend beyond the product being DOA when received.
If the customer is within the 7 days and feels they have a claim, they MUST submit a proof of purchase and close up photos of the product with all the connections made and both sides so we may inspect the connections and the quality of the soldering. The customer must also submit a video that shows the issue. Claims without these details will not even be considered and will be denied. We have found that roughly 98% of all customer claims on electronics are, in fact, due to user error (crashing, incorrect connections, or poor soldering skills etc). There are occasionally valid claims but they are extremely rare.