PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter

FlightClub Neutron 5" Skeleton Race Frame

The FlightClub Neutron custom drone frame has all the great features from the PROton, just shrunk down to use the smaller 20x20mm components.
Availability: In stock
£54.00

Overview:

The FlightClub Neutron custom drone frame has all the great features from the PROton, just shrunk down to use the smaller 20x20mm components. This version is the 5" Skeleton with Race arms with red nucleus plate.

Featuring a mini Nucleus plate that is CNC’d from a solid piece of aluminum. It has butter mounts and threaded holes for the arm screws. Butter mount is a flight controller mounting method invented by us that isolates the flight controller from any vibrations using custom silicone grommets. This greatly reduces noise in the gyro ensuring an ultra smooth flight. The mini Nucleus plate also has threaded holes for the arm screws that eliminates the need to fumble around with nuts to mount the arms. Simply screw the arm screws right into the aluminum plate.

Neutron Features:

- 5″ arm configuration is 205mm
- Mini Nucleus Plate CNC’d out of 7075 Aluminum
- Can do skeleton or hybrid pod
- Threaded holes in the Nucleus plate for easy arm replacements. No nuts or pliers needed.
- Designed for 20x20mm components. (max length of board is about 36mm. No it will not fit the RF Spark32)
- Butter Mounts for a vibration free flight controller stack. The Butter Mounts have a M3 center hole but M2 screws will work also.
- Chamfered edges on the bottom carbon fiber plate
- Countersunk holes on the bottom plate for a completely flat bottom
- Camera protection on both skeleton and hybrid mode
- Camera angle approximately: Hybrid pod 30-80, Skeleton 0-80 degrees
- 65g Skeleton (5″ arms), 70g Hybrid Pod Canopy

Included:

Base Neutron will include the following: 

1 – Mini Nucleus CNC Aluminum Plate
1 – 2.5mm chamfered, countersunk bottom CF Plate
4 – 4.5mm Arms
12 – Silicone injection molded Butter Mounts
4 – M3x20mm Button head screws (for flight controller stack)
9 – M3x10mm Flat Head Hex screws (arm screws)
4 – M3 Nylon nuts
1- TPU VTX antenna mount
1 – FlightClub Velcro Strap
1 – FlightClub Sticky Battery Pad
Stickers

Skeleton Mode will include the Base Neutron above plus:

1 – 2mm CF top plate
4 – 25mm Black Standoffs
2 – TPU Camera mount adapters for Micro Camera
8 – M3x8mm button head hex screws