FlightOne Bolt32 4in1 ESC (RaceFlight)
The FlightOne (Formerly RaceFlight) Bolt32 4in1 electronic speed controller (ESC) was designed for power and performance.
Availability: In stock
The FlightOne (Formerly RaceFlight) Bolt32 4in1 electronic speed controller (ESC) was designed for power and performance. Coupled with the Revolt or RevoltOSD FCs, the Bolt32 makes a thin stack while keeping the escs save inside the frame, protected from prop strikes. The escs are also safe from vibrations thanks to the integrated FlightOne Gummies.
The FlightOne Bolt32 4in1 is also extremely easy to install. It is compatible with 4s through 6s batteries and has a built-in current sensor that hooks up directly to the Revolt or RevoltOSD to provide amp draw and mAh consumed information. The Bolt32 provides direct lipo power for the RevoltOSD. When using a Revolt V3, a 5v bec is needed.
** Please be careful with the cables on this ESC, make sure to read the included documentation **
** ALWAYS use the included gummies. RaceFlight provide no warranty when they aren't used **
- 30.5mm x 30.5mm mounting hole spacing
- Integrated FlightOne Gummies
- 50 amp per channel
- BlHeli32 and more to come!
- D-Shot ready
- 4s – 6s compatible
- Built in Current Sensors
- Special low noise connector integrated with the Revolt and Bolt pair
- Current and Voltage sent to flight controller
- Easy Install
- High-quality components
- Weight: 15.5 grams
- 1x FlightOne / RaceFlight Bolt32 4in1 ESC
- Rubber "Gummies"
** WARRANTY WARNING: FlightOne have a very restrictive warranty policy. Essentially if you haven't installed it to their standards (used gummies, soldering perfect etc) expect them to reject any warranty claims we put their way. They will offer a discount replacement as a stock solution. Please only buy these products if you are happy with those terms, if the product works when you get it then odds are you will be offered a discount replacement only if it subsequently fails **