The latest high performance ESCs from Hobbywing. The Hobbywing XRotor Nano 4in1 20A ESC for brushless motors is a 4in1 esc with 20x20mm mounting and offers a continuous rating of 20A and supports bursts of upto 30A. The firmware is BLHeli_S supporting DSHOT 600.
Highly Integrated & Compact
The XRotor Nano 20A 4in1 BLHeli_S DShot600 not only includes 4 high-performance 20A ESCs, but also a volt monitoring port which allows FC to monitor the voltage in real time (on condition that the FC supports this function). With the incredibly small size, the installation and wiring can be very simple and easy when pairing it with the Hobbywing XRotor Nano Flight Controller. It’s an ESC specially designed for super mini-sized indoor FPV(s).
The use of EMF8BB21F16G MCUs with the operating frequency of up to 48MHz, imported high quality MOSFETs, 3-in-1 drive ICs and ceramic capacitors, 3-ounce copper, and 6 layers of PCBs guarantees less heat, higher efficiency and rapider response.
BLHeli-S Firmware Ready
The ESC (with great performance and rich functions) uses the original BLHeli-S firmware and supports adjusting parameters or upgrading firmware via different methods (i.e. via throttle signal wire with using other development board or a FC flashed with the Cleanfight / Betaflight firmware).
Besides the regular PWM mode, Oneshot125/Oneshot42/Multishot modes, the latest DShot150/300/600 modes are also supported. In DShot150/300/600 modes, the ESC has great anti-interference performance and rapid response.
Hardware Generated PWM & Damped Light Mode
The ESC firmware uses hardware generated motor pwm for smooth throttle response and silent operation. Damped light does regenerative breaking, causing very fast motor retardation, and it inherently also does active freewheeling.
- XRotor Nano 20A 4in1 ESC BLHeliS DShot600
- Continuous/Peak Current: 20Ax4/30Ax4
- Size: 20x20mm mounting
- Lipo Cells: 2-4S
- Bec Output: No
- Input Wires: Red-16AWG-85mm / Black-16AWG-85mm
- Output Wires: No wires but solder tabs
- Firmware: BLHeli-S A-H-50 16.5
- Dimensions: 32x31.9x5.8mm
- Weight: 6g
- 1x XRotor Nano 20A BLHeli_S 4in1 ESC
- 1x Capacitor
- Cables (JST + input wires)
- 1x XRotor Manual