iFlight BLITZ F7 Stack (FC + E55 4in1 ESC)

iFlight BLITZ F7 Stack (FC + E55 4in1 ESC)
Manufacturer: iFlight
Availability: In stock
£125.80 inc VAT
Ship to
Shipping Method
Estimated Delivery
No shipping options


The iFlight BLITZ F7 stack includes a BLITZ F7 + E55 4in1 ESC. The flight controller features a powerful F722 processor and BMI270 gyro. The BLITZ F7 is compatible with both analogue video and DJI digital. The flight controller some useful LED lights to aid in diagnostics/debugging. An LC Filter circuit is included to improve analogue video and 32Mbit onboard Blackbox logging is included.

The iFlight BLITZ E55 4in1 ESC is a 55A constant current rated 4in1 ESC. The E55 is capable of bursts of upto 65A and includes an on board current sensor. The E55S is 2-6S rated and has 30.5mmx30.5mm mounting holes.

** WARNING: in line with the warranty the manufacturer offers us on these boards, we offer ZERO warranty once the board is soldered. We are happy to attempt a warranty claim but success is unlikely. Please keep that in mind when purchasing **


- Improved circuit design, better components and lower electrical noise!
- DJI HD VTX Connector (VBAT Passthrough)
- FC indicator LEDs for visual debugging
- With LC filter

** Safety reminder: The DJI plug&play port has no voltage regulator (BEC) and is passing through VBAT. The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). You will also need to add extra capacitors to provide spike filtering and prevent the flight controller being destroyed **

FC Specifications:

- MCU: STM32 F722
- Gyro: BMI270
- Barometer: DPS310
- OSD Chip: AT7456E
- Flash: 32MB (Blackbox flash)
- UARTS: 6
- Motor outputs: 4x (SH1.0 connector)
- I2C serial: SDA / SLA pads
- Smartaudio / IRC Tramp VTX protocol supported
- LED controller: Yes
- Beeper pad: Yes
- Firmware target: IFRC-IFLIGHT_BLITZ_F722
- Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
- Dimensions: 36.5*35 mm
- Weight: 7.8g
- BEC: 5V  2.5A

E55 4in1 ESC Specifications:

- Mounting Holes: 30.5*30.5mm/Φ4mm
- Weight: 15.3g
- Supports 2-6S lipo input
- MCU:G071
- Constant: 55 Amps 
- Burst: 65 Amps
- Current sensor: Yes
- BEC: No
- Current rate: 200
- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- Target:   IFLIGHT_BLITZ_G2
- Target:   QH-50 16.7


- iFlight BLITZ F7 Stack (FC + E55 4in1 ESC)
- Accessories (XT60 pigtail, JST Wires, Silicone Grommets)