iFlight SucceX Mini F4 Tower V2 + 35A 4in1 ESC (20mm)
The iFlight SucceX 2-6S Mini F4 Tower V2 is specially designed for Micro FPV racers, which includes advanced SucceX mini F4 Flight Controller with SucceX 35A 4 in 1 V2 ESC, that can handle up to 6s batteries and push your FPV racer sky high.
Availability: In stock
The iFlight SucceX 2-6S Mini F4 Tower V2 is specially designed for Micro FPV racers, which includes advanced SucceX mini F4 Flight Controller with SucceX 35A V2 4 in 1 ESC, that can handle up to 6s batteries and push your FPV racer sky high. The FC and ESC neatly stack together with pinned interconnects that make your build easy to assemble and cleaner looking. This tightly pre-built stack will fit any frame that has 20 x 20mm mounting holes.
The iFlight SucceX Mini F4 V2 Tower is a quick and convenient way to go when starting a new micro build to FPV Flight!
The new released iFlight SucceX Mini F4 V2 flight control has been heavily optimised. The main soldering port has been upgraded to terminal plugs, which is convenient for pilots to assemble and disassemble. The F405 MCU is equipped with the MPU6000 gyroscope is optimised for better flight performance. Programmable RGB LED interface has been built-in for external LED to set LED color, function, and status. The built-in OSD chip helps to monitor the status of the flight data any time.
The latest developed BLHeli-32-bit 35A V2 4-in-1 mini ESC is highly integrated, greatly reduced from the standard size, features excellent performance, supports 6S, the target is iFlight-BL32-4IN1.Supporting Dshot, Multishot, Oneshot, etc. The soldering pad is semi-extended which saves room.
** We currently wouldnt advise running this on 6S or on a 5" build. On 6S capacitor usage is absolutely critical to prevent voltage spikes killing the voltage regulator. Use it on 4S, 3-4" builds. **
- STM32 F405 MCU FC w/OSD, integrated MPU6000 accelerometer and gyro;
- Plug-in connection, pin header design, easy to install and disassemble;
- BLHeli-32-bit 35A 4-IN 1 ESC
- Compact size 31*30*26mm (26mm is the overall length of the bolt, but some of that will go through your frame)
- Super-lightweight xxg(including screws,aluminum column & nuts)
SucceX mini F4 V2 Flight Controller Specs:
- MCU: 100MHz STM32F405
- IMU: MPU6000 gyro/accelerometer (SPI)
- Integrated LC Filter
- Input Voltage: 2-6S Lipo
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC Output: 5V@3A
- Size: 26x26mm board, 20mm mounting holes (M2)
- VCP, UART
- WS2812 Led Strip: Yes
- Beeper: For active 5V buzzer
- Target：omnibus F4SD
SucceX Mini 35A V2 2-6S 4 in 1 ESC Specs:
- Current Sensor: yes
- Input:2-6s lipo
- Installing Hole: 20x20mm, M2
- Dimensions:31*31mm(including the power pads)
- Mounting Holes:20*20mm
- Supports Dshot1200，Proshot,Oneshot,Multishot
- 1x iFlight SucceX Mini F4 V2 Flight Controller
- 1x iFlight SucceX Mini 35A V2 2-6S 4 in 1 ESC
- Cable Set