Lumenier POPO® Quick Swap MX2206-9 2450KV Motor
The Lumenier POPO® Quick Swap MX2206-9 2450KV Motor. POPO motors allow mounting of compatible propellers without a nut, and easily change out props in seconds.
Availability: In stock
The Lumenier POPO® Quick Swap MX2206-9 2450KV Motor is the first motor to incorporate the revolutionary Lumenier Quick Swap system. This motor has been designed to provide maximum power and thrust in a small and lightweight package. The MX motors use a more powerful stator in combination with N52SH magnets and very small air gap, resulting in incredible power and performance.
Designed to provide top power during drone racing and freestyle with a KV of 2450kv. The new POPO® Quick Swap MX2206 motors come in at 27.5g continuing Lumenier's tradition of creating some of the lightest racing motors on the market.
What is POPO
POPO® implements an elegant push button quick release mechanism in the established 5mm prop shaft. Props that are compatible can use the mechanism as well as be mounted on non-POPO compatible motors, allowing pilots to easily mix and match. The system does not get in the way of mounting non-POPO compatible props, which are mounted with a conventional lock-nut and wrench, just like it works on any other motor today.
To mount a POPO® compatible prop, you place the prop onto the shaft, press the button, lower the prop onto the motor, release the button and then slowly turn the propeller while pushing the prop onto the motor. Pilots hear an audible click when the button pops out, indicating its ready for flight.
- Kv 2450
- Configuration 12N14P
- Windings 9 turn DLRK
- Termination D (Delta)
- Stator Diameter 22mm
- Shaft Diameter 3mm
- Motor Dimension 27x18mm
- Weight 27.5g
- Idle Current @12.6v (Io) 0.76 A
- Cells (LiPo) 2-4S
- Max Continuous Current (A) 60s 22A
- Max Burst Current <10s 32A
- Max Continuous Power (W) 60s 320W
- Max Efficiency Current (2.2-6A) 80%
- Internal Resistance (Rm) 240mΩ
- Motor Wire Length 100mm
- Motor Connection Bare Wire
- 1x Lumenier POPO Quick Swap MX2206-9 2450KV Motor
- 1x Lumenier M5 Black Aluminum Low Profile Lock Nut (CW) for non-POPO motors
- 4x M3x5 Button head screws