Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!

Matek F411-Mini SE F4 Flight Controller

The Matek F411-Mini SE has a built-in OSD and MPU-6000 gyro.
Availability: Out of stock


The Matek F411-Mini SE has a built-in OSD and MPU-6000 gyro. The board as standard is 20x20mm mounting holes but always comes with a 30.5x30.5mm mm mounting hole adapter board. This FC runs on Betaflight and the MatekF411SE target. The board comes with Vibration isolation mounting hardware.


- MCU: 100MHz STM32F411CEU6
- IMU: MPU6000 (SPI)
- Baro: BMP280 (I2C)
- OSD: AT7456E (SPI)
- Blackbox: No
- 2x Uarts
- 2x Softserial-Tx
- 6x PWM outputs (Dshot/Proshot/oneshot/multishot)
- 1x I2C
- 3x ADC (VBAT, Current, RSSI)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
- TR/SA VTX control: Yes
- Camera control: Yes
- WS2812 Led control : Yes
- Beeper output: Yes
- RSSI: Yes
- Filtered Vbat output power for VTX, Switchable via AUX (modes tab-user1)
- Convertible 20mm to 30.5mm mounting


- 1x F411-miniSE
- 1x 20mm to 30.5mm conversion plate
- 6x Silicon grommets M4 to M3
- 6x Brass grommets M3 to M2
- 1x SH1.0_8pin cable 5cm
- 2x SH1.0_8pin connectors