PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter

Matek F722-SE AIO Flight Controller

The Matek F722-SE AIO Flight Controller (All in one) features a dual gyro, dual camera input, VTX power switcher.
Availability: In stock
£33.95

Overview:

The Matek F722-SE AIO Flight Controller (All in one) is the latest all in one board from Matek. It has a built-in OSD, VTX power switcher, Dual Camera input (with switcher), MicroSD card for blackbox and BMP280 Barometer for use with iNAV. The Flight Controller supports both BetaFlight and iNAV. The board also feaures a dual Gyro (MPU6000, ICM20602), you can select between them via software.

Features:

- MCU: 216MHz STM32F722RET6
- IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
- Baro: BMP280 (I2C)
- OSD: AT7456E (SPI)
- Blackbox: MicroSD card slot (SPI)
- 5x Uarts (1,2,3,4,6) with build-in inversion
- 1x Softserial supported
- 8x Dshot/Proshot/oneshot outputs
- 1x I2C
- 4x RX6 pad(one per cornet) for BLheli32 ESC telemetry
- 4x individual ESC power/signal pads
- 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
- Dual Camera image switchable via AUX (modes tab-user2)
 

PDB Specifications
- Input: 6~36V (3~8S LiPo) w/TVS protection
- PDB: 4x35A (Max.4x46A)
- BEC: 5V 2A cont. (Max.3A)
- LDO 3.3V: Max.200mA
- Current Sensor 184A (Scale 179)
- Battery Voltage Sensor: 1:10 (Scale 110)
- FC Firmware
- BetaFlight / INAV
- Target: MATEKF722SE
- Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 36 x 46 mm
- Weight: 10g

Included:
- 1x Matek FC F722-SE Flight Controller
- 6x silicon grommets M4 to M3
- 1x FR4 PCB Plate 36*36*1mm
- 1x Rubycon ZLH 35V/470uF (Low ESR)