Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!

Matek F765 Wing Flight Controller

The Matek F765-Wing is a dedicated flight controller for fixed wing using an ultra fast F7 processor and featuring on board Barometer and full support for INAV.
Availability: In stock


The Matek F765-Wing is a dedicated flight controller for fixed wing. New features include ardupilot support and new faster CPU (STM32F765). The power regulators are now on the top plate of the board allowing a massive 8A continuous or 10A burst! The Matek F765 features all the usual things you would expect including 7x Uarts, 12x PWM outputs, BMP280 Barometer, OSD, onboard dual camera input with video switcher and plenty of sensor inputs.


- MCU: STM32F765VIT6, 216MHz , 512KB RAM, 2MB Flash
- IMU: MPU6000 (SPI1) & ICM20602 (SPI3)
- Baro: BMP280 (I2C2)
- OSD: AT7456E (SPI2)
- Blackbox: MicroSD card slot (SDIO)
- 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
- 1x Softserial1_Tx (INAV)
- 12x PWM outputs (S1~S10 support Dshot)
- 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 2x I2C
- 1x SPI4 breakout
- Switchable Dual Camera Inputs
- Switchable 5V/9V(12V) for Camera/VTX
- High-precision Current Sense
- ADC VB2 voltage divider: 1K:10K
- ADC AirSpeed voltage divider: 10K:10K
- TR/SA VTX control: Yes
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: Yes
- Analog Airspeed sensor: Yes
- Digital Airspeed sensor: Yes

FC Firmware
- INAV Target: MATEKF765

- ArduPilot(ChiBiOS) Target: MATEKF765-WING

- Input voltage range: 9~36V (3~6S LiPo) w/TVS protection

- 2x ESC power pads
- Battery Voltage Sensor: 1:10 (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
- Current Senor: 132A, 3.3V ADC (Scale 250 in INAV, 40 A/V in ArduPilot)

BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

- Continuous current: 2 Amps, Max.3A

BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.

- Continuous current: 2 Amps, Max.3A
- 12V option with Jumper pad

BEC Vx output
- Designed for Servos

- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 8 Amps, Max.10A

BEC 3.3V output
- Designed for Baro / Compass module and Spektrum RX

- Linear Regulator
- Continuous current: 200mA

- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 54 x 36 x 13 mm
- Weight: 26g

1x Matek F765 Wing Flight Controller 

3x header Pin rows (board is shipped unsoldered)