Speedybee F7 V2 AIO FC

The Speedybee F7 V2 AIO flight controller integrates bluetooth and wifi to change parameters/firmware by the Speedybee app.
Availability: Out of stock
£47.95 inc VAT
Ship to
Shipping Method
Estimated Delivery
No shipping options

The Speedybee F7 V2 AIO flight controller integrates bluetooth and wifi for easy changing of parameters and firmware via the Speedybee app. The flight controller also features an F7 MCU with onboard blackbox logging and supports direct connection of a DJI air unit via a dedicated connection port.


- MCU STM32F722
- IMU MPU6000
- USB Type-C
- Baro BMP280 (I2C)
- OSD BetaFlight OSD w/ AT7456E chip
- BLE Support, used for Flight Controller configuration
- WiFi Support, used for data transfer, e.g firmware
- flashing, and Blackbox analysis.
- DJI Air Unit slot A full DJI Air Unit JST slot onboard
- BlackBox 16MB onboard dataflash
- Current Sensor 1 : 10 (Scale 168)
- BetaFlight Camera Control Pad Yes
- Power input 3S - 6S Lipo
- 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
the maximum load current is 2.5A.
- 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
- 4.5V power output 1 * 4.5V output pad
- 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
- ESC signal M1 - M4
- ESC Telemetry UART UART4 RX
- I2C Used for external Magnetometer, Sonar, etc.
- LED pin Used for WS2812 LED
- Buzzer BZ+ and BZ- pad used for 5V Buzzer
- Boot button Used to easy enter DFU mode
- RSSI input RSSI input solder pad
- SmartPort Use any TX pad of UART for the SmartPort feature.
- Support Flight Controller Firmware BetaFlight(Default), EMUFlight
- Target name SPEEDYBEEF7V2
- Mounting 30.5 x 30.5mm, 4mm hole size
- Dimension 41 x 38 x 6.9mm
- Weight 9g


1x Speedybee F7 V2 AIO FC