PAYMENT METHODS
Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!
Newsletter
Featured products

AfroFlight Full Naze 32 Flight Control Board

This is the full version of the Acro Naze 32 with magnetometer and barometer sensors as well as gyro and accelerometer. Designed for use with small indoor or small to mid-sized outdoor multirotors.
£31.88

Emax Nighthawk X5 Frame 200mm 5"

The Nighthawk-X4, X5, and X6 are EMAX’s first pure X frames with equidistant motor placement and centered mass for the ultimate in balance and agility. For ultra clean builds, our team created a custom PDB with Dual Shielded Voltage Regulators, integrated XT60 battery connector, low voltage buzzer and programmable LED strip.
£34.60

HobbyRC Gift Voucher (£40 - £100)

Not sure what somebody wants for their mulitrotor? No problem! Give them a voucher!
£0.00

HS1177 Plastic Cased Mini Board Camera Sony Super HAD CCD with 600TVL (IR Blocked)

This mini board camera has a 1/3" Sony Super HAD CCD and 600TVL. This board camera is the equivelant of the hugely popular CC1333 in a much smaller format.
£26.90

HS1177M Mini Board Camera Sony Super HAD CCD with 600TVL (IR Blocked)

This mini board camera has a 1/3" Sony Super HAD CCD and 600TVL. This board camera is the equivelant of the hugely popular CC1333 in a much smaller format.
£28.12

Lumenier QAV-R FPV Racing Quadcopter Frame (5" Arms)

The Lumenier QAV-R FPV racing quadcopter airframe is a light weight, super stiff, finely tuned airframe designed for high performance FPV Drone Racing. The airframe implements 4mm thick removable arms and supports various arm sizes supporting 4", 5", and 6" propellers.
£92.50

Mobius ActionCam V3 1080p FPV Video Camera

The Mobius ActionCam is one of the most sophisticated mini cameras around. Measuring 1 3/8″ x 2 1/2″ x 3/4″ inches and weighing only 1.4 ounces, this camera can easily fit in any pocket, but press record and you will capture stunning 1080 HD video quality normally only found on devices 5 times the size.
£59.90

Shendrones Tweaker 5" Frame

Designed by Andy Shen, It's a Tweaker, only bigger. 220mm, for 5" props. The bottom plate is 4mm, top plate 2mm. A 3d printed fpv cam mount is included, with click stops for 5, 20, 35, and 50 degrees.
£54.92