RadioLink A560 3D Aerobatics Plane (RTF)

Overview:

The RadioLink A560 is a 58CM 3D aerobatic model that includes an onboard stabliser with 6 flight modes. The A560 includes a transmitter, battery and USB charger. The six flight modes (Vertical Mode (Multicopter), Vertical Mode (Fixed-wing), Stabilize Mode, Acrobat Mode, Gyro Mode, and Manual Mode enable both beginners and professional pilots to fully enjoy Aerobatic flights.

The R8XM receiver and T8 transmitter includes built in telemetry which allows battery voltage display to be sent down and displayed on a mobile phone connected by Bluetooth. The transmitter is long range (upto 4KM line of sight).

The A560 uses high quality components throughout includes a SZ-Speed Motor, Flycolor ESC and Gemfan propeller. The CM210 charger is powered over USB making it very flexible as it can be charged from mobile phone chargers with USB ports etc.

The A560 is easy to disassemble and easy to replace as the smart design uses only 5 plastic buckles. Assembly takes around 3 minutes and uses only a standard small screwdriver.

The A56 includes a carry case making it much easier to transport to the flying field.

Specifications:
- Product Name: A560
- Material: Polypropylene
- Wingspan: 580mm
- Length: 560mm
- Takeoff Weight: 207g (with battery)
- Flight Stabiliser: Radiolink Byme-A (Compatible with SBUS receivers)
- Motor: SZ-Speed 2206F 1450KV Brushless Motor
- Propellers: Gemfan 8038
- Battery: 7.4V 600mAh LiPo
- Flight times: 10 mins vertical, 20mins stabilise mode
- Servos: Aileron 9g / Elevator & Rudder 4.3g
- Charger: CM210 2S LiPo battery charger
- Controller: Radiolink T8S/T8FB
- Receiver: R8XM

Includes:
1x RadioLink A560 3D Aerobatics Plane
- Accessories