DarwinFPV CineApe20 (ELRS)

DarwinFPV CineApe20 is a 2-inch, 3S Cinewhoop with either a DJI O4 or a DJI O4 Pro fitted.
Manufacturer: DarwinFPV

Overview:
The CineApe20 is now fully compatible with the DJI O4 series; both versions currently available offer either the O4 Air Unit or the O4 Air Unit Pro. The CineApe20 features a soft, impact-resistant TPU canopy which eliminates the need for bulky shock-absorbing balls and a complicated assembly. 

The CineApe20 is a lightweight 2-inch FPV whoop designed for micro-drone enthusiasts who demand high-quality video from their flights. Compact and lightweight at under 100g (without battery). Whether flying in tight indoor spaces or open outdoor areas, it delivers excellent performance and stability.

From the outset, DarwinFPV designed the CineApe20 with beginners in mind. Its fully modular, plug-and-play construction removes the need for soldering, making maintenance and upgrades straightforward. The carbon fibre frame combined with high-strength polycarbonate guards keep the drone protected during heavy landings and bumps. This makes it one of the most beginner-friendly drones to get into FPV flying.

Compared to the original model, the CineApe20 retains the same great flight performance but swaps the frame for durable TPU and now includes GPS for added functionality - all while maintaining DarwinFPV’s focus on exceptional value for money.

Currently one of the most affordable 2-inch whoop FPV drones on the market, the CineApe20 offers safety, durability and versatility for cinematic shooting, freestyle flying or casual practice. It’s an excellent entry point for anyone unsure which FPV drone to start with.

Need some batteries and a transmitter? Check out the Related Products at the foot of this page to complete your FPV setup!

Features:
- Both the DJI O4 Air Unit & the DJI O4 Air Unit Pro are compatible with: DJI Goggles 3, DJI Goggles N3. DJI Goggles 2 & DJI Goggles Integra are supported in O3 compatibility mode.
- Palm-sized and portable – ideal for both stable indoor shooting and dynamic outdoor flights, making it perfect for beginners. 
- TPU frame filters out low-frequency vibrations without the need for shock-absorbing balls, reducing rolling-shutter effects. Two sets of mounting holes at the front and back let you position the camera so the guards stay out of view even in O3 ultra-wide-angle mode. Softer, durable TPU also offers better protection for the camera  in crashes.
- Integrated, enclosed body design with smooth contours improves flight characteristics, helps prevent debris ingress and enhances durability. 
- Built-in GPS across the range – with a front-mounted unit to minimise antenna interference. Adds an extra layer of safety in case of emergencies. 
- New Bling Series 1103 motors with a softer shaft design for improved crash resistance. Supports 2–3S batteries, providing up to 5.5 minutes of flight time and a 6:1 thrust-to-weight ratio for an ideal balance of power and endurance. 
- Modular, plug-and-play components – camera, VTX and motors are all easy to swap without soldering, simplifying maintenance and upgrades for newcomers. 
- Flexible mounting options – top plate includes both 20×20mm and 25.5×25.5mm hole patterns to accommodate analogue VTXs, DJI O3, RunCam Link, Walksnail, OpenIPC and DJI O4.

Specification:
- Model: DarwinFPV CineApe20
- Category: 2" FPV Cinewhoop
- Weight (without battery): ~100g 
- Frame material: 2mm carbon centre plates with TPU/PC protective frame and prop guards 
- Wheelbase: 90mm 
- Flight controller/ESC: F411 AIO board with onboard 15A BlueJay ESCs 
- Motors: Bling 1103 8000KV 
- Propellers: Gemfan 2023-3 or similar 2" 3-blade props 
- Battery compatibility: 3S LiPo 380–500mAh (see Related Products below for suggested batteries)
- Battery connector: XT30
- Onboard ELRS receiver (to use the O4 air unit without ELRS, you must re-solder the SBUS wire to the flight controller) 
- Manufacturer flight time: up to 5 minutes in ideal conditions 
- Thrust-to-weight ratio: ~6:1 
- Camera/VTX compatibility: Supports both DJI O4 units with canopy swap. Also supports analogue or O3 VTXs.
- Dimensions: 125×125×90mm

Available versions (see below for purchase options): 
- DarwinFPV CineApe20 O4 BNF
- DarwinFPV CineApe20 O4 Pro BNF

Included:
- 1x DarwinFPV CineApe20 (ELRS)

Picture of DarwinFPV CineApe20 O4 BNF
DarwinFPV CineApe20 O4 BNF
CineApe20 fitted with a DJI O4 Air Unit. ELRS receiver Onboard.
Availability: Out of stock
£237.05 inc VAT
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Picture of DarwinFPV CineApe20 O4 Pro BNF
DarwinFPV CineApe20 O4 Pro BNF
CineApe20 fitted with a DJI O4 Air Unit Pro. ELRS receiver Onboard.
Availability: In stock
£416.25 inc VAT
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options