FrSky TD SR10 10Ch Dual Band Receiver

FrSky Tandem TD SR10 10Ch Dual Band (2.4GHz / 900MHz) Receiver with 3 axis advance stabiliser
Manufacturer: FrSky
Availability: Out of stock
£78.65 inc VAT
Ship to
Shipping Method
Estimated Delivery
No shipping options


The FrSky Tandem TD SR10 10 Channel dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only the low latency signal and long range control, also benefits from enhanced level of high reliability and anti-interference performance.

The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data (Power & Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.

The configurable 10 channel ports are a big feature of TD SR10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.

The TD SR10 offers an ADV Stabiliser function which is an upgrade over the original classical gyroscope stabilisation modes. The ADV Stabiliser offers an advanced mode that provides more programmable stabilized channels and flexibility.

The classical stabilisation mode has been enhanced with 5 additional stabilisation channels, providing pin mapping to each channel in the multiple flight modes like Stabilisation, Auto-Level, Hover, and Knife-Edge with an airplane model.

In the advanced stabilisation mode, all the output pins are configurable for stabilisation and additional advanced features such as Stab file sharing, programmable parameters, and developer access, etc.

The advanced stabiliser feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilisation receiver.

- Simultaneous working dual-band TD mode
- Triple antenna design for multi-directional coverage
- Built-in Advanced Stabilization Functions
- Built-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.)
- Black Box function
- Built-in voltage sensor
- 4ms Race Mode with Telemetry
- Long control range (Range varies based on the RF Power settings.)
- Over-The-Air (OTA) FW update
- Supply current range(every single port)Instantaneous current: 5A, Continuous current: 3A
- 10 Configurable Channel Ports CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In, CP2-10: PWM / SBUS Out / FBUS / S.Port

- Frequency: 900MHz & 2.4GHz

- Dimension: 46.5*26.3*14.7mm (L*W*H)
- Weight: 17g
- Operating Voltage: 3.5-10V (Recommend 2S Li Batteries)
- Operating Current: ≤170mA
- Voltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
- Compatibility: Tandem series radio & TD protocol capable RF module
- Dual XT30 Power Input Connector
- Triple Antenna Design (2×2.4G & 1×900M antennas)

1x FrSky TD SR10 10Ch Dual Band Receiver