FrSky Vantac RF007 Rotorflight Flight Contoller

Overview:

The Rotorflight Vantac RF007 is a cutting-edge flybarless (FBL) helicopter flight controller with a built-in FrSky receiver. The RF007 integrates with ETHOS radios for intuitive configuration and real-time tuning, giving you unparalleled control of your aircraft. The RF007 is powered by an STM32F722 MCU, paired with an ICM42688P gyro/accelerometer and SPL06 barometer. It uses a 128MB Blackbox for flight data logging making it easy to fine tune your setup.

Features:
- Runs Rotorflight 2.x Helicopter Control Software
- Built-In FrSky FBUS-Capable Receiver (TW or AP Protocol)
- Robust CNC Aluminum Case, Functional Heatsink for MCU
- STM32F722 Microcontroller for Power and Flexibility
- Precision Barometer, 3-Axis Gyroscope and 3-Axis Accelerometer
- 128MB Blackbox Function for Tuning/Troubleshooting
- 9 Primary Main Header Pins for Flexibility and Power Distribution

Specifications:
- Flight Controller Firmware: Rotorflight 2.x
- Dimensions: 43.5x31.2x13.7mm
- Weight: 25.2g
- Operating Voltage Range: 5-16V
- Operating Current (FC Only): 125mA@5V
- Voltage Measurement Range via AIN (External device): 0-80V
- RxUG Port: For Upgrading Internal RX Firmware (In case of OTA upgrade failure)
- Note: When powering this RxUG port, do not introduce additional power input from other ports to ensure the safe operation of the connected devices.
- MCU: STM32F722RET6
- Gyroscope (IMU): ICM-42688P
- Barometer: SPL06-001
- Blackbox Flash: 128MB
- Servo Ports: Servo 1, Servo 2, Servo 3, Tail
- ESC Ports: ESC (Throttle), RPM (Sensor), TLM (ESC Telemetry or other functions)
- Other Ports: AUX and SBUS Out/In
- Expansion Ports: Port A, C, and RxUG

Available versions:
- RF007 ARCHER+: Built-In 2.4G Archer Plus RS Receiver
- RF007 TWIN: Built-In Dual 2.4G TW R6 Receiver

Includes:
- FrSky Rotorflight Vantac RF007 ** See below for available versions **
- Accessories