GEPRC Cinebot30 HD DJI O3

GEPRC Cinebot30 HD DJI O3. PNP & ELRS versions available.
Manufacturer: GEPRC

Overview:

The GEPRC Cinebot30 is a new generation of Cinematic FPV drone developed by GEPRC team. The high-strength 7075 aircraft-grade aluminum alloy bracket for FPV camera escort, the combination of classic engineering and aesthetics. The newly polished gimbal damping module can easily fix high-frequency vibration and jello issues. It can be mounted with GEPRC Naked GoPro Hero 8 and GoPro Black Bones, Insta 360 GO2 and other cameras. The image is stable and clear, and it’s easy to film.

The upgraded DJI O3 video transmission system has an upgraded gimbal top plate, compatible with VTXs mounted with 4-hole screws. Cinebot30 can mount a full-sized GoPro camera very well and the battery life can reach 5 minutes and 30 seconds. However, the GEPRC team recommends flying with Naked GoPro 10 which allows battery life of up to 10 minutes and 30 seconds.

Adopts high strength one-piece injection-molded propeller guard and high-toughness and impact-resistant PC material for injection molding. A ring-shaped Cob light strip is embedded in the propeller guard, and the light effect is carefully tuned. High-strength grain-cut carbon fiber sheet, the overall strength of the fuselage is upgraded again!

Cinebot30 will be equipped with a powerful 1804 motor with optimized motor magnetic circuit and surging torque, which can easily cope with ultra-low altitude shooting. With HQ prop T76mm*3 propeller, it gets the lowest noise effect in its class. Using GEP-F722-45A AIO v2 flight controller, higher performance redundancy, and easy handling of unexpected situations. Finely polished frame design, only 6 screws need to be removed to separate the aircraft top plate and protection frame. Easy to cope with the urgent need to replace the accessories, at any time to restore the state.

Tuned by GEPRC professionals, the Cinebot30 is a Cinematic FPV that performs both indoor and outdoor flights equally well. The Cinebot30 explores endless possibilities for your drone shots!


Features:

- Adopts the most advanced O3 Air Unit FPV digital video transmission system on the market
- Video transmission with high-definition anti-shake 4K 60fps ultra-high resolution video quality
- The highest bit rate is 50MBPS, the delay is as low as 30 milliseconds, and the highest image quality is 1080P 60FPS
- Design that combines engineering and aesthetics.
- Quick-disassembly design, only need to remove 6 screws to upgrade or replace parts.
- Selected high strength and impact-resistant PC material for injection molding.
- Aviation 7075 aluminum alloy camera mounting bracket and fuselage aluminum column.
- Propeller guard embedded ring Cob light strip, carefully tuned light effect. Color brightness in the day and night can be clearly displayed.
- The newly developed gimbal shock absorption structure can disintegrate high frequency jitter and jello effect. Easily carry a variety of action cameras.
- Powerful 1804 motor, surging torque to deal with ultra-low altitude flight at will.
- With the new GEP-F722-45A AIO V2, stable performance, more secure flight
- Four kinds of FPV system with the program, choose to belong to your first-person view
- Tuned by GEPRC professionals, delicate and silky flying feel

Specifications:
- Model: GEPRC Cinebot30 HD DJI O3 (PNP)
- Brand: GEPRC
- Frame: GEP-CT30 O3
- Wheelbase:127mm
- Isolation Plate:2mm
- Main plate:3mm
- Bottom plate:1.5mm
- FC: GEP-F722-45A AIO V2
- MCU: STM32F722RET6
- IMU: ICM-42688-P
- VTX: DJI O3 Air Unit
- Camera: DJI O3 Camera
- Propeller: HQ prop T76mm
- Antenna: Peano 5.8G 110mm LHCP UFL Antenna
- Charge connector: XT60H-M
- Motor: SPEEDX2 1804-2450KV(6S Version)
- Weight: DJI O3 version 234.7g
- Recommended Battery: LiPo 6S 850mAh-1100mAh(6S Version) with XT60

Available Versions (See below for purchase options):

PNP Version:
- No receiver included. Add your own supporting SBUS or Serial connection e.g Crossfire, FrSky, ELRS. PNP version also works with the DJI FPV Controller V2.

ELRS Version:
- ELRS - ELRS UART based receiver included 

Includes:

- GEPRC Cinebot30 HD DJI O3 (See below for versions available)
- Accessories

Picture of GEPRC Cinebot30 HD DJI O3 (PNP)
GEPRC Cinebot30 HD DJI O3 (PNP)
GEPRC Cinebot30 with HD DJI O3 Air Unit. PNP version - no receiver included.
Availability: In stock
£458.95 inc VAT
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Picture of GEPRC Cinebot30 HD DJI O3 (ELRS)
GEPRC Cinebot30 HD DJI O3 (ELRS)
GEPRC Cinebot30 with HD DJI O3 Air Unit. UART based ELRS receiver included.
Availability: In stock
£469.35 inc VAT
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options