iFlight Defender 20 Cinewhoop

iFlight Defender 20 Cinewhoop. Available in PNP & ELRS versions.
Manufacturer: iFlight


The iFlight Defender 20 Cinewhoop is a sub 250g cinewhoop that uses the O3 air unit for 4K recording. The Defender 25 features an innovative quick release battery to make filming days even easier. The O3 air unit is a naked version to save weight giving a flying weight of only 178g.

Remarkably Lightweight And Portable
The palm-sized, compact Defender 20 is just as portable as it can be. The whole frame is injection molded for durability and lightweight, equipped with a naked DJI O3 air unit (Supplied by DJI). It's not only regulation-friendly, but also the safest in its series, allowing you to fly anywhere and whenever.

One-button Functional Power Switch
Better operation through one physical button, not only just power on and off but also inbuilt programmable RGB light colors and modes to visually display the battery power. We’ve added a protective circuit to extend the lifespan of the battery connector and prevent rapid voltage or current spikes which can protect your electronics from damage.

Innovative Quick-Release Battery with Type-C Charger
The Defender 20 comes with a stock 3S 900mAh providing up to 7min flight time. Crash protected battery shell and innovative quick-release structure for easy replacement. Upgraded plug and play Type-C charger for user-friendly fast charging, get 80% charge in just 18 minutes. The battery has an inbuilt auto-discharge module, it will discharge itself when not in use, making it safe and worry-free.

Extremely Convenient User Experience
No fear of dust, take off boldly. By using dustproof port plugs to isolate the interface from the outside, ensure function properly. Extend the life of the interface.

The drone can be disassembled with only 6 screws, making it much more convenient for maintenance and repair.

Full plug and play high performance AIO, 30% increase in redundancy to cope with extreme operations. Integrated beeper for quick retrieval of accidental loss.

All ports and buttons are easy to access.

Countless easy-to-use features let you get started right away. 
1) No soldering is required for the whole drone, motors, and propellers adopting the plug-in mounting method. 
2) A dedicated VTX mount bracket with a central grille opening, together with the air duct design in the drone, can dissipate heat when flying.
3) USER1 preset as video transmitter power supply switch, used to manually turn off the VTX when idle to safe power and prevent overheating. 
4) Customized vibration damped O3 camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the in-built or in-post camera stabilization, jello free.

- Product Name: Defender 20 O3 3S HD

- Flight Electronics: Defender 16/20 F411 AIO
- Video Transmission: DJI O3 Air Unit (Naked version)
- Frame wheelbase: 97mm
- Motor: Defender20 1204 motors
- Prop: Defender20 2020-3 props
- Takeoff Weight incl. 900mAh battery: 178g
- Dimensions (L×W×H):135x136x52mm
- Max Speed: 75Km/H (Manual Mode)
- Maximum Takeoff Altitude: 2000 m
- Max Hover Time: Approx. 7.5 mins(with 3S 900mAh battery)

Available Versions (See below for purchase options):
PNP Version:
- No receiver included. Add your own supporting SBUS or Serial connection e.g Crossfire, FrSky, ELRS. Also works with the DJI FPV Remote V2.
ELRS Version:
- ELRS - ELRS UART based receiver included 

- iFlight Defender 20 Cinewhoop

- 1x Battery (3S 900mAh)
- Accessories

Picture of iFlight Defender 20 Cinewhoop (ELRS)
iFlight Defender 20 Cinewhoop (ELRS)
iFlight Defender 20 Cinewhoop. UART ELRS receiver installed.
Availability: In stock
£400.20 inc VAT
Ship to
Shipping Method
Estimated Delivery
No shipping options
Picture of iFlight Defender 20 Cinewhoop (PNP)
iFlight Defender 20 Cinewhoop (PNP)
iFlight Defender 20 Cinewhoop. PNP Version - No receiver included.
Availability: Out of stock
£385.80 inc VAT
Ship to
Shipping Method
Estimated Delivery
No shipping options