Accepted Payment Methods
Like Us On Facebook For All Our Latest News and Updates!

Matek F722 Wing Flight Controller

The Matek F722-Wing is a dedicated flight controller for fixed wing using an ultra fast F7 processor and featuring on board Barometer and full support for INAV.
Availability: Out of stock


The Matek F722-Wing is a dedicated flight controller for fixed wing. Featuring multiple high output BECs, 5V/5A for servos, 12V/2A for FPV gear and 5V/2A for accessories like GPS module, RC receiver etc. The Matek F722-Wing also has a number of built in features like a massive 5 usable Uart ports (each with inversion), MicroSD for blackbox logging, BMP280 Barometer and built in OSD (On Screen Display). The F722 Wing also features a new dual camera switcher increased voltage support (increased to 8S) and faster processor 216MHz vs 168MHz on the F405 Wing.


- MCU: 216MHz STM32F722RET6
- IMU: MPU6000 (SPI)
- Baro: BMP280 (I2C)
- OSD: AT7456E (SPI)
- Blackbox: MicroSD card slot (SPI)
- 5x Uarts (1,2,3,4,6) with built-in inversion
- 1x Softserial-Tx
- 2x Motors, 6x Servos outputs
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, AirSpeed)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- Switchable Dual Camera Inputs
- Switchable 5V/9V for Camera/VTX
- High-precision Current Sense
- TR/SA VTX control: Yes
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: Yes
- Analog Airspeed sensor Compatible: Yes
- Digital Airspeed sensor Compatible: Yes

FC Firmware
INAV Flight/BetaFlight

Target: MATEKF722SE

- Input voltage range: 9~36V (3~6S LiPo) w/TVS protection

- 2x ESC power pads
- Battery Voltage Sensor: 1:10 (Scale 1100)
- Current Senor: 132A, 3.3V ADC, Scale 250

BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

- Continuous current: 2 Amps, Max.3A

BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.

- Continuous current: 2 Amps, Max.3A
- 12V option with Jumper pad

BEC Vx output
- Designed for Servos

- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 5 Amps, Max.6A
- Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)

BEC 3.3V output
Designed for Baro / Compass module and Spektrum RX

Linear Regulator
Continuous current: 200mA

Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 54 x 36 x 13 mm
Weight: 25g

1x Matek F722 Wing Flight Controller 

3x header Pin rows (board is shipped unsoldered)