Radiomaster ER16 PWM Dual-Band Gemini-X Receiver
The Radiomaster ER16 is built for large-scale aircraft that demand redundancy, robust power handling, and reliable system integration. Designed with redundancy at every critical point - RF link, power input, and system control.
Overview:
The Radiomaster ER16 is a high-capacity, full-diversity ExpressLRS receiver designed for large fixed-wing aircraft and other RC models requiring multiple servo connections and dependable power management. Its dual Semtech LR1121 transceivers support Gemini and Gemini-X operation, combining 2.4GHz and 868MHz in the LBT version for additional RF link resilience.
With 16 individual PWM outputs, the ER16 can connect directly to servos without requiring a separate flight controller. CRSF and SBUS serial connectivity is also provided for integration with compatible flight controllers, stabilisers and telemetry peripherals. Amplified PWM signal outputs help maintain signal quality across longer servo leads, making the receiver particularly suitable for larger aircraft with more extensive wiring.
Power redundancy is a key feature of the ER16. Two electrically isolated XT30 power inputs allow separate power sources to supply the receiver and servo rail, with automatic continuity if one supply fails. Four independent voltage monitoring inputs provide detailed information on the receiver supply, both XT30 power sources and an external flight battery.
The receiver also includes a dedicated safety switch connection, Wi-Fi configuration and firmware updates, and secure MMCX antenna connections. Supplied with both 2.4GHz and dual-band antennas, the ER16 offers considerable flexibility when planning an advanced RC aircraft installation.
Features:
- Dual-band Gemini and Gemini-X: Supports simultaneous 2.4GHz and 868MHz operation in Gemini-X mode, or dual-antenna operation within the same frequency band in Gemini mode.
- Full RF diversity: Two independent RF transceivers and antenna connections provide additional reception redundancy to help maintain a reliable control link.
- Redundant power inputs: Two isolated XT30 connectors support independent power sources, allowing the receiver to continue operating if one supply fails.
- Amplified PWM outputs: Signal amplification helps maintain reliable servo control over long extension leads and improves compatibility with larger, high-torque servos.
- Comprehensive voltage monitoring: Four independent ADC inputs allow simultaneous monitoring of the receiver supply, both XT30 power inputs and an external battery.
- Dedicated safety switch: The supplied external safety switch module allows the receiver to remain inactive until deliberately powered on.
- Flexible system integration: CRSF and SBUS serial outputs support connection to compatible flight controllers, stabilisers and telemetry devices.
- High-power telemetry: Adjustable telemetry output helps maintain a reliable return data link from the aircraft.
- Wi-Fi configuration: Firmware updates and receiver configuration can be carried out through the ExpressLRS WebUI without dismantling the installation.
- Secure antenna connections: MMCX connectors provide a robust, replaceable antenna connection.
- Aircraft-focused layout: Top-mounted PWM connections provide convenient access and help keep servo wiring organised in larger airframes.
- Protective housing: Injection-moulded enclosure provides a durable casing for the receiver electronics.
*** PLEASE NOTE: ***
Dual XT30 Power Input:
The XT30 inputs provide direct battery voltage to the receiver and PWM power rail. Output voltage matches the connected input voltage. Use only servos rated for the applied voltage. High-voltage systems (2S LiPo/Li-ion) require HV-rated servos. Standard 5V servos must be powered through a regulated 5V supply or the standard servo power input pins. When using the XT30 inputs to power the receiver and servos, the ESC’s 5V/BEC wire must be disconnected to prevent back-feeding and possible damage.
EXT-V Power Input:
The EXT-V input is accessed through the 2-pin JST-GH connector. Connect the red wire to the positive (+) terminal of the battery or ESC. The ER16 provides independent ADC channels for monitoring V-EXT and V-XT30, allowing it to accurately detect and report the appropriate input voltage for your installation. Designed for large-scale systems using multiple servos and long wiring runs.
Specification:
- Model: Radiomaster ER16 PWM Dual-Band Gemini Receiver
- Region: LBT
- Wireless protocol: ExpressLRS
- RF architecture: Dual-band Gemini / Gemini-X
- Frequency bands: 2.4GHz and 868MHz
- RF transceivers: 2 × Semtech LR1121
- Main processor: ESP32-S3
- PWM outputs: 16 channels
- Serial outputs: CRSF / SBUS
- Receiver input voltage: 5–12V DC
- Power inputs: 2 × XT30
- Maximum telemetry output power: 100mW (adjustable)
- Voltage monitoring inputs:
- Receiver supply (V-PWM): Up to 12V
- XT30 input 1: Up to 12V
- XT30 input 2: Up to 12V
- External voltage (EXT-V): 4–70V
- UART connection: 4-pin JST-GH
- External voltage connection: 2-pin JST-GH
- Antenna connections: 2 × MMCX
- Antenna length: 25cm
- Required ExpressLRS firmware: Version 4.1.0 or later
- Dimensions: 61.5 × 43.8 × 16.8mm
- Weight: 33g (excluding antennas)
Included:
- 1x Radiomaster ER16 Pro PWM Dual-Band Gemini Receiver
- Accessories