Walksnail Avatar HD Pro Micro Kit (Dual Antenna) (8GB)

Overview:

The Walksnail Avatar HD Pro micro Kit with dual antennas includes an Avatar V2 8GB VTX module, two antennas, and an Avatar micro Pro camera. The dual antenna version includes better signal integrity and numerous other small improvements to the design. The Pro camera excels in low light levels and is the first HD FPV camera to support 120FPS at dawn/dusk. The system is capable of transmitting at 1080P/120FPS (and more) with an average latency of 22ms in high frame rate mode. The included camera has a 4K 2.7" sensor and measures 19x19x22mm (micro size). The Avatar VTX is a single-board design weighing only 15.4g, with 25.5 x 25.5 mm and 20 x 20 mm mounting holes. The Avatar HD system supports BetaFlight canvas mode for OSD. The Avatar system has an average of 22ms latency in high frame rate mode. The VTX includes on-board 8GB storage, allowing it to record 1080p or 720p flight videos without interference.

This version is the 8GB kit, dual antenna with PRO camera and supports gyroflow.

Compatible with the Walksnail HD goggles or Fat Shark Dominator Avatar HD Goggles.

Features:
- Dual antennas
- Compatible 4K
- 1080P 120fps compatibility
- 22ms low latency
- Ranging Mode
- 4KM range
- Light-weight design
- FOV160°
- Built-in 32G storage
- Support Gyroflow
- 6V-25.2V
- The only native 4:3 high-definition sensor in the FPV industry

Avatar HD Pro Micro Camera Specifications
- Model    Avatar Pro camera
- Image Sensor    1/1.8-Inch Sony Starvis II Sensor
- Resolution    1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; 
- Ratio    4:3/16:9
- Lens    2.1mm
- FOV    160°
- Aperture    F1.6
- Shutter    Rolling shutter
- Min.Illumination    0.001Lux
- Weight    9.5g
- Dimensions    19*19*24mm
- Coaxial Cable    140mm
- Gyroflow   supported

Avatar V2 VTX (8GB) Specifications
- Model    Avatar V2 module (Dual Antenna Version)
- Communication Frequency    5.725-5.850GHz
- Transmitter Power (EIRP)    FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
- MIC:<25dBm
- 1/O Interface    JST1.0*4(Power in)JST0.8*6(USB)
- Mounting Holes    25.5*25.5mm; 20*20mm
- Dimensions    33.5*33.5*10.5mm
- Storage   8GB Model (Gyro Flow Supported)
- Recording    1080p/720p
- Weight    17.6g
- Operating Temperature    -20-40℃
- Channels    8
- Wide Power Input    6V-25.2V
- Supported FC System    Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD    Canvas mode
- Latency    Average delay 22ms
- Antenna    1(IPEX)

Avatar V2 Antenna Specifications    
- Polarisation    LHCP
- Bandwidth    5600MHz-6000MHz
- Gain    1.9dBi
- VSWR    ≤1.5
- Input Impedance    50Ω
- Interface    IPEX-1
- Size    R15 X 45mm （without cable）
- Weight    2g

Included:
- 1x Avatar HD V2 Micro Kit - Dual Antenna (8GB VTX, HD Pro Camera, Antennas)
- Accessories (Wires, screws, etc)