Walksnail Avatar HD V2 Micro Kit (Dual Antenna) (32GB)

Walksnail Avatar HD V2 Kit, dual antennas, 32GB VTX, micro camera and two LHCP antennas
Manufacturer: Walksnail
Availability: In stock
£159.00 inc VAT
Ship to
Shipping Method
Estimated Delivery
No shipping options


The Walksnail Avatar HD V2 micro Kit with dual antennas includes a Avatar V2 32GB VTX module, two antennas and an Avatar micro V2 camera. The dual antenna version includes better signal integrity and numerous other small improvements to the design. The system is capable of transmitting at 1080P/120FPS (and more) with an average latency of 22ms in high frame rate mode. The included camera has a 4K 2.7" sensor and measures 19x19x22mm (micro size). The Avatar VTX is a single board design weighing only 18g, with 25.5x25.5 & 20x20mm mounting holes. The Avatar HD system supports BetaFlight canvas mode for OSD. The Avatar system has an average of 22ms latency in high frame rate mode. The VTX includes on board 32GB storage allowing it to record 1080p or 720p flight videos without interference.

This version is the 32GB kit, dual antenna and supports gyroflow.

Compatible with the Walksnail HD goggles or Fat Shark Dominator Avatar HD Goggles.

- Dual antennas
- Compatible 4K
- 1080P 120fps compatibility
- 22ms low latency
- Ranging Mode
- 4KM range
- Light weight design
- FOV160°
- Built-in 32G storage, 
- Support Gyroflow
- 6V-25.2V
- The only native 4:3 high-definition sensor in the FPV industry

Avatar Micro Camera Specifications
- Model    Avatar V2 camera
- Image Sensor    1/3.2-Inch 4MP 4:3sensor
- Resolution    1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; 
- Ratio    4:3 native /16:9
- Lens    2.1mm
- FOV    160°
- Aperture    F2.0
- Shutter    Rolling shutter
- Min.Illumination    0.001Lux
- Weight    7.2g
- Dimensions    19*19*22mm
- Coaxial Cable    140mm
- Gyroflow   supported

Avatar V2 VTX (32GB) Specifications
- Model    Avatar V2 module (Dual Antenna Version)
- Communication Frequency    5.725-5.850GHz
- Transmitter Power (EIRP)    FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
- MIC:<25dBm
- 1/O Interface    JST1.0*4(Power in)JST0.8*6(USB)
- Mounting Holes    25.5*25.5mm; 20*20mm
- Dimensions    33.5*33.5*10.5mm
- Storage    32GB Model (Gyro Flow Supported)
- Recording    1080p/720p
- Weight    15.4g
- Operating Temperature    -20-40℃
- Channels    8
- Wide Power Input    6V-25.2V
- Supported FC System    Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD    Canvas mode
- Latency    Average delay 22ms
- Antenna    1(IPEX)

Avatar V2 Antenna Specifications    
- Polarization    LHCP
- Bandwidth    5600MHz-6000MHz
- Gain    1.9dBi
- VSWR    ≤1.5
- Input Impedance    50Ω
- Interface    IPEX-1
- Size    R15 X 45mm (without cable)
- Weight    2g

- 1x Avatar HD V2 Micro Kit - Dual Antenna (32GB VTX, Micro V2 Camera, Antennas)
- Accessories (Wires, screws etc)