Walksnail Avatar Mini 1S Kit

Overview:

The Walksnail Avatar Mini 1S Kit includes an Avatar 1S VTX module, one LHCP antenna and an Avatar nano camera. The system is capable of transmitting at 1080P/60FPS, 720P/120FPS or 720P/60FPS with an average latency of 22ms in high frame rate mode. The included camera has a 1/2.7" sensor and measures 14x14x17mm (nano size). The Avatar 1S VTX is a single board design weighing only 6.8g, with 25.5x25.5 mounting holes. The Avatar HD system supports BetaFlight canvas mode for OSD. The VTX includes on board 8GB storage allowing it to record 1080p or 720p flight videos without interference. This is the system you want for a 1S whoop.

Compatible with the Walksnail HD goggles or Fat Shark Dominator Avatar HD Goggles.

Features:
- 1080P/60fps, 22ms low latency
- 3.1V-5V
- Power 350mW
- Built-in 8G storage
- 6.8g light weight

Avatar 1S VTX Specifications:
- Model: Avatar mini 1s module
- Communication Frequency: 5.725-5.850GHz
- Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
- MIC:<25dBm
- I/O Interface: JST1.0*6(Power in)JST1.0*4(USB)
- Mounting Holes: 25.5*25.5mm
- Dimensions: 33*33*6.5mm
- Storage: 8G
- Recording: 1080p/720p
- Weight: 6.8g
- Operating Temperature: -20-40℃
- Channels: 8
- Wide Power Input: 3.1V-5V
- Supported FC System: Betaflight
- OSD: Canvas mode
- Bitrate: 25mbps 50mbps
- Latency: Average delay 22ms
- Antenna: IPEX

Avatar Nano Camera Specifications:
- Model: Avatar nano
- Image Sensor: 1/2.7”1nch
- Resolution: 1080P/60fps,720P/120fps,720P/60fps
- Ratio: 16/9  4/3
- Lens: 2.1mm
- FOV: 170°
- Aperture: F2.0
- Shutter: Rolling shutter
- Min.Illumination: 0.001Lux
- Weight: 3.5g
- Dimensions: 14*14*17mm
- Coaxial Cable: 55mm /90mm

Included:
- 1x Avatar Mini 1S Kit (VTX, Nano Camera, Antenna)
- Accessories (Wires, screws etc)