We stock a wide variety of Radio Transmitters accessories including batteries for FrSKY radio systems, chargers, EVA Bags, Gimbals etc.
Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
ELRS 2.4GHz Antenna - 40mm in length.
ELRS 2.4GHz Antenna - 90mm in length.
The ETHIX Neck Strap / lanyard is designed to be the best all round neck strap on the market
FrSky G-2000 LSD Ni-MH 2000mAh 7.2V Battery Pack for Taranis Q X7
FrSky 6 pack of AA rechargeable 1800mAh LSD NiMH Batteries for Taranis Q X7.
A must have for those based in Europe running the Ni-Mh pack in the FrSky TARANIS transmitters. It’s perfectly matched to give you be best life out of your Transmitter Pack.
The FrSky ASS-100 Air Speed Sensor is a Smart Port enabled sensor capable of measuring between 0-223mph on RC planes.
The FrSky ASS-70 Air Speed Sensor is a Smart Port enabled sensor capable of measuring between 0-167mph on RC planes.
Measure the current draw up to 40 amps in real time with this current sensor. Compatible with all SMARTPort enabled receivers.
This is a new sensor designed and developed by FrSKY to collect important flight information and performance data which can then be transmitted via the SMART PORT of telemetry-enabled receivers such as X8R, X6R, X4R, etc to a Taranis Transmitter.
Upgrade your Taranis Q X7 with this plug-n-play high resolution M7 Gimbal from FrSky.
FrSky M7-R hall sensor gimbal is specially designed for FPV racing pilots who are using the FrSky Taranis Q X7 or Taranis X7S Transmitter.
The FrSky M9 Hall Sensor will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Sold individually - two identical gimbals are required to upgrade your radio.
FrSky M9-R Gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis X9D/X9D Plus Transmitter. The 45° throttle travel will allow you to achieve a quick throttle response resulting in precision control.
FrSky has shrunk the original FLVSS by around 50% by removing the OLED screen.
One standard 100mm FrSky receiver antenna - suitable for newer receivers (such as the R-XSR, XM, XM+).
One standard 150mm FrSky receiver antenna - suitable for any FrSky 2.4GHz receiver with 'snap on' u.FL/IPX connector (X4R, X8R, etc.).
One standard 150mm IPEX4 FrSky receiver antenna - suitable for newer receivers.
EVA Bag for Frsky Taranis Q X7 or X7S easy to carry and fully protects your Taranis.
EVA Bag for Frsky Taranis easy to carry and fully protects your Taranis X9D.
The FrSky Variometer sensor calculates the altitude from atmospheric pressure. This is the high precision version with resolution down to 0.1m.
The FrSky Variometer sensor calculates the altitude from atmospheric pressure. Atmospheric pressure will get lower as you go up in altitude, using this the sensor will estimate the altitude.
A genuine replacement charger the Taranis X9D to charge Ni-Mh packs.
The HobbyRC Transmitter Lanyard strap sits nicely around your neck taking strain off your wrists and allowing you to fly for longer without discomfort.
The ImmersionRC Ghost Proton Pack allows easy integration of a Ghost receiver and Tramp VTX, into a quad. This is the 20x20mm version.
The ImmersionRC Ghost Proton Pack allows easy integration of a Ghost receiver and Tramp VTX, into a quad. This is the 25x25mm version ideal for Tinytrainers or Toothpicks.
The ImmersionRC Ghost Proton Pack allows easy integration of a Ghost receiver and Tramp VTX, into a quad. This is the 30x30mm version.
ImmersionRC Ghost qT antenna for Atto receivers.
Upgraded Cable Set For Jumper T16
The Immortal T V2 has improved durability and signal sensitivity.
With the long-stem version of the TBS Immortal T V2 we have managed to improve on the durability and signal sensitivity.
With the extra long-stem version of the TBS Immortal T V2 we have managed to improve on the durability and signal sensitivity. Now with an extra long 220mm cable.
This adapter board is designed to fit the Nano Diversity RX like a glove, hassle free and easy soldering.
This TBS Crossfire Nano RX adapter board is designed to fit the nanoRX like a glove, hassle free and easy soldering.
TBS Crossfire/Tracer 6CH PWM adapter board allowing 6CH PWM output from a nano crossfire/tracer.
TBS Tracer - Peter the penetrator antenna is a high gain antenna for when you need more range.
After-market mod to add a module bay to your Tango 2.
Upgraded PCB for TBS Tango 2.
Flexible stick-on dipole antennas for the TBS Tracer radio system.
Ultra-compact T-shaped dipole antenna for TBS Tracer radio link
TBS Tracer sleeve dipole receiver antennas for ultimate performance.